Will have to investigate via serial console. Tested with Occidentalis 0. Delivery and Returns see our delivery rates and policies thinking of returning an item? Works out of the box, but it requires a powered hub the Raspberry Pi boots with this dongle plugged in, recognizes and configures it, works for some time, but then it crashes randomly under heavy traffic. For Debian, the firmware must be installed instructions. An illustrated installation guide in French and so that it doesn’t go wrong, guiding the user step by step up to the internet connection wifi.

Uploader: Kigasida
Date Added: 12 May 2007
File Size: 43.46 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 24109
Price: Free* [*Free Regsitration Required]

An installation guide can be found here. FF this is indicative that there is not enough power [10].

When directly powered by Raspberry Pi, it fails after a few minutes. Works with powered usb-hub or shorted polyfuses. An earlier version gave me problems. Has the ralink chipset, works directly plugged into the Raspberry Pi rev.


Works only through powered USB hub. Works out of the box on Raspian Wheezy and Raspbmc Shows up as a Ralink RT device, and no drivers or additional software downloads required. Tested on Raspbian too drivers from aircrack-ng.

For automatic installation, See MrEngmanns script listed below under the Edimax device. Image Unavailable Image not available for Colour: No external power needed but warning when hot plug because RPi is rebooting. Be the first to review this item.

Tested in Raspbian, powered from USB hub.

RPi USB Wi-Fi Adapters –

Needs a powered USB hub. No powered USB hub needed.

The PC can’t connect herculess lan! Check your Device manager, and see whether there is a wireless Lan drivers! Optimal management of priorities of multimedia data transfer thanks to WiFi technology multimedia standardized by the WiFi Alliance.

Gives “couldn’t load firmware” error.

Windows 7 x32, Windows 8 x32 hercules wireless g usb2 Driver 4. Path to hostapd in driver package: Working out-of-the-box on Arch image from Also works with all internet “box” on the market Livebox, Freebox, neufbox, You can edit your question or post anyway.


Hercules HWNRi-300 – wireless router – 802.11b/g/n – desktop

If not, try to download a driver to install! Verified working with wheezy-raspbian right out of the box. Amazon Second Chance Pass it on, trade it in, give it a second life.

Hardware detected as rt, but it is missing firmware; “sudo apt-get install firmware-ralink” fixed it. Aanbevolen is om de Raspberry Pi te rebooten met het volgende commando: Step-by-step installation and configuration instructions with screenshots can be found here.

Eminent EM – rtusb driver. And there are Hercules drivers. When I go to my network and sharing center, it says that the adapter is not connected. Works good after that.